경로

플래너

기능

업데이트

App

로그인 또는 가입

앱 다운로드

로그인 또는 가입

디스커버
Places to see
네덜란드
흐로닝언
스킴다

몰렌 더 델렌

몰렌 더 델렌

57명 중 56명이 추천함

저장

공유

  • 더보기

  • 저장

    공유

  • 더보기

  • 목적지로 설정

    여기 경로

    최고의 몰렌 더 델렌 자전거 투어 경로

    4.8

    (5)

    35

    자전거 타는 사람

    1. Winschoten에서 출발하는 몰렌 더 델렌 – Hondshalstermeer 순환 코스

    53.1km

    03:06

    80m

    80m

    중급용 자전거 라이딩. 좋은 체력 필요. 대부분 포장된 지면. 실력과 관계없이 누구나 갈 수 있음.

    탐색하기

    휴대폰으로 전송

    중급

    중급용 자전거 라이딩. 좋은 체력 필요. 대부분 포장된 지면. 실력과 관계없이 누구나 갈 수 있음.

    중급

    중급용 자전거 라이딩. 좋은 체력 필요. 대부분 포장된 지면. 실력과 관계없이 누구나 갈 수 있음.

    중급

    10월 25, 2023

    The Netherlands is known for its iconic windmills, of which there are more than 1,000. These mills were traditionally used to drain polders, generate energy and produce food such as flour.

    번역자 Google •

      5월 15, 2021

      Mill database: molendatabase.nl/nederland/molen.php?nummer=342

      This mill was built after the burning down of a (much smaller) predecessor. The last mill dated from 1794.
      Traditionally the mill had two mortars; since 1926, one of them could also be driven by an electric motor. Due to land consolidation, the mill became redundant and became more or less 'dry'.
      For this reason it was decided to relocate: in 1984 the mill was dismantled and moved to its current location on Termunterzijldiep. The Dellen is now located next to the "Tichelwaark" pumping station and can be used in an emergency. The Tichelwaark polder is 260 hectares in size (ZP ± -2.50 NAP). Relocation and restoration were carried out by the Molema company from Heiligerlee.

      Both auger wheels are made of cast iron, equipped with eight spokes in which 38 conical combs. The now antique 50 hp Heemaf electric motor from 1926 remained in the mill after the move, albeit out of use and installed separately.
      The self-yielding valves have been made of aluminum since 2000. Striking are the transverse flaps at all ends, which have been restored almost everywhere, but are still present here. In 1958, 35 Groningen mills still had such valves; now only two!

      Some other notable details: the catch beam does not rotate with a pin through the front easel, but is attached to the bottom of that easel with a metal hinge. This construction also occurs on the other polder mill in Scheemda and on 'De Rat' in IJlst (the latter is not coincidental, because its roof comes from the demolished polder mill of Scheemderzwaag!).
      The neck bearing is made of cast iron, with a layer of babbits applied to the track.
      At its old location in 't Waar, the mill was a so-called gauge mill. Such a mill reported during the day using the blade position and at night through a lantern in the blade top, when further grinding through the polders is prohibited due to a very high drainage level. Here, despite the presence of a wicker cross, there was a high mast next to the miller's house with a 1000 Watt lamp on top.
      The Mill Foundation Central and East Groningen wants to reconstruct such a level mast at this mill (and is looking for the resources to do so).

      번역자 Google •

        나만 알고 있는 정보가 있다면 로그인하여 다른 모험가에게 도움이 될 만한 팁을 추가해보세요!

        무료 회원 가입

        세부정보

        정보

        고도 40 m

        날씨

        AerisWeather 제공

        오늘

        일요일 19 10월

        13°C

        8°C

        0 %

        지금 활동을 시작하면...

        최고 풍속: 13.0 km/h

        가장 많이 방문한 시기

        1월

        2월

        3월

        4월

        5월

        6월

        7월

        8월

        9월

        10월

        11월

        12월

        Loading

        위치:스킴다, 흐로닝언, 네덜란드

        살펴봐야 할 유명한 장소

        탐험하기
        ルート경로 플래너기능하이킹MTB 트레일로드 사이클링 경로바이크패킹
        앱 다운로드
        소셜 미디어에서 팔로우하기

        © komoot GmbH

        개인 정보 보호 정책