エムティングハウゼンでの 周辺の簡単なハイキングとウォーキング

Another well-preserved windmill on Syker Straße. Nice to look at and worth a quick photo stop.

Googleによる翻訳•原文を表示

The Robberts Huus has been beautifully restored.

Googleによる翻訳•原文を表示

Robberts Huus was built in 1695 as a cross-passage barn and expanded over the centuries into a residential/stable house. The listed building has now become a cultural meeting center where events, weddings and regular meetings take place.

Googleによる翻訳•原文を表示

Don't drive too fast. Didn't even see the cafe.

Googleによる翻訳•原文を表示

The Galerieholländer windmill, built by H. Cordes in 1873, was owned by the Lange family for many decades. From 1930 to 1960 it was leased to master miller Dietrich Hustedt and then sold to Werner Eilers. In 2006 the windmill was bought by the municipality of Emtinghausen. After a very extensive renovation with subsequent installation of a complete grinder by the municipality and the village association Emtinghausen-Bahlum, the mill was inaugurated in 2010 as part of the 750th anniversary of the municipality of Emtinghausen. Today the mill serves as a meeting place, event and exhibition venue.

Googleによる翻訳•原文を表示

On the left of the road and on top of a hill is this building with rotating wings. Very impressive.

Googleによる翻訳•原文を表示

It owes its German name to Dutch mill builders, with the Dutch engineer and mill designer Jan Adriaanszoon Leeghwater being named as the inventor of the rotating cap. The lower part of these mills is mostly made of brick or beams (Mill Alt Schwerin), so it is extremely stable and exerts less ground pressure because it has no individual foundations. The movable head (cap or hood) of the mill resting on the "tower" made of wood or masonry with the blades attached to the impeller shaft can be rotated via rollers (formerly made of wood, later made of steel) and a jug ring (Dutch Kroyring). stored at the top of the tower. A sanding cap works without rollers and sits on sanding boards that are lubricated with soft soap. So only the upper part - the cap (boat-, onion-, cone-shaped) - had to be turned into the wind. Originally with internal agitator, a rotary mechanism built into the hood (15th century), which makes some of these mills (depending on the internal agitator, which is also operated from the gallery via a gear wheel with endless chain protruding from the end of the cap) appear more compact because of the larger hood. Since the late 16th century[2], they have increasingly been equipped with external churning, consisting of five control bars (four V-shaped "swords" or "Schoren" with a middle, actual codend (Sterz)) that protrude over the laterally protruding from the cap "Spreetbalken" (crossbar) the cap is actuated by means of a windlass attached to the end of the cod end, or with a compass rose (automatic wind tracking) attached to the end of the cap on a solid frame, patented in 1745 by the Englishman Edmund Lee from Brockmill Forge near Wigan. The lower, fixed part, on the other hand, could be used as the actual work platform (grinding mill, sawmill, pumping station, etc.), for storing and loading goods, and also as a living space and sales room. High Dutch mills thus have several floors or floors (Söller, Low German Soller, Dutch zolder), here for a nine-storey mill, starting with

Googleによる翻訳•原文を表示

First mentioned in 1561. Now completely renovated and owned by the village association.

Googleによる翻訳•原文を表示