Tips
beRecont
18. september 2023
Cykling
In 1904 the large shaft furnace was built by Alois, Anton and Franz - all sons of Franz Reinagl. At that time it was one of the largest of its type in Central Europe. In 1926 the facility was purchased by Count Ernst Hoyos-Sprintzenstein and converted from coal to wood burning.
The firing process required around 9m³ of wood and 3m³ of stones to achieve a firing temperature of 2000°C. This then burned for 36 hours to extract around 3 tons of lime. The limestone was placed in the kiln and the result was said slaked lime.
The firing process required around 9m³ of wood and 3m³ of stones to achieve a firing temperature of 2000°C. This then burned for 36 hours to extract around 3 tons of lime. The limestone was placed in the kiln and the result was said slaked lime.
Oversat af
•
•Kender du stedet? Log ind for at tilføje et tip til andre eventyrere!
Opret gratis konto
Ruter i nærheden
Bedste ruter nær Reinagl Lime Kiln
5,0
(3)
9
Cyklister
32,4km
02:08
330m
330m
Middel cykeltur. Kræver god kondition. For det meste belagte overflader. Egnet for alle færdighedsniveauer.
Middel
4
Cyklister
40,8km
02:44
480m
480m
Svær cykeltur. Kræver meget god kondition. For det meste belagte overflader. Egnet for alle færdighedsniveauer.
Svær
5,0
(1)
7
Cyklister
40,8km
02:39
480m
480m
Svær cykeltur. Kræver meget god kondition. For det meste belagte overflader. Egnet for alle færdighedsniveauer.
Svær
Detaljer
Oplysninger
Højdemeter 490 m